Air-Cooled Low Temperature Chiller for Coating Workshops | Improve Film Uniformity by 38%

Are Surface Defects Slowing Down Your Coating Line?

In many coating workshops, manufacturers encounter recurring problems:

1.Microscopic defects on product surfaces

2.Repeated parameter adjustments with no improvement

3.Delayed production schedules

4.Often, the real bottleneck is not the coating material — but the cooling system.

In precision coating processes, temperature stability directly determines film uniformity and adhesion strength. Even small fluctuations can affect yield and product consistency.

Precision Cooling Designed for the Coating Industry

The dannice  air-cooled low temperature chiller is engineered specifically for coating applications.

Unlike conventional chillers with wide temperature variation, it integrates advanced sensing and control technology to achieve ±0.5°C temperature accuracy.

Verified Field Performance

In an optical coating factory:

1.Film thickness uniformity improved by 38%

2.Equipment utilization increased by 27%

3.Annual rework costs reduced by over RMB 1,000,000

Three Key Technologies Behind Stable –10°C Cooling

Dual-Stage Compression Refrigeration Cycle

Ensures stable –10°C chilled water output even during peak summer conditions, eliminating seasonal temperature fluctuations.

Intelligent Fuzzy Control System

1.7-inch industrial touchscreen

2.Stores up to 100 process recipes

3.One-click parameter recall during changeovers

4.Reduced human operational errors

Modular Energy-Saving Compressor Design

Parallel compressor system automatically adjusts to real-time load, delivering 20–35% higher energy efficiency compared to conventional chillers.

Application Case: Mobile Phone Glass Coating Factory

In a Guangdong-based mobile phone glass coating plant, DANNICE delivered a customized –10°C solution:

1.Eliminated rainbow patterns in AF coatings

2.Reduced coating cycle time from 90s to 65s per piece

3.Achieved six months of continuous zero-failure operation

4.Yield improved from 82% to above 96%

Choosing the Right Industrial Chiller

Common concerns include:

1.Limited workshop space

2.24/7 peak production stability

3.Compliance with environmental refrigerant standards

4.DANNICE addresses these with:

5.Compact split-type design

6.MTBF exceeding 50,000 hours

7.Environmentally friendly refrigerants compliant with new regulations

8.Stable temperature control is not just cooling — it is production insurance.